Cook Propeller Inline Manuale Utente Scaricare il pdf (Pagina 1)

Tube Axial Fans

INSTALLATION, OPERATION, AND MAINTENANCE MANUAL

Storage

If the fan is stored for any length of time prior to installation,

rotate the propeller several revolutions every three to five

days. This keeps a coating of grease on all internal bearing

parts. Block propeller to prevent natural rotation and store it

in its original shipping crate and protect it from dust, debris

and the weather.

Outdoor Storage

To maintain good working condition of the fan when it is

stored outdoors or at a construction site, follow the addi-

tional instructions below.

• Coat the shaft and bearings with grease or rust preventa-

tive compound to help seal out moisture.

• Periodically rotate the propeller and dampers (if sup-

plied) to keep a coating of grease on all internal bearing

parts.

• Periodically inspect the fan to prevent damaging condi-

tions.

• Block propeller to prevent natural rotation.

• Cover the unit with some type of weather cover to pre-

vent moisture, corrosion, dirt or dust accumulation.

Installation

Motor Installation

To prevent damage to the fan during shipping, motors 5

HP and larger, and extremely heavy motors (cast iron or

severe duty) are shipped loose and must be field mounted

by bolting the motor on the motor mounting plate in the

existing mounting slots.

Propeller Inline

This publication contains the installation, operation and

maintenance procedures for standard units of the ADD,

ADB, EDD, EDB, TID & TIB Tube Axial Fans:

Carefully read this publication and any supple-

mental documents prior to any installation or

maintenance procedure.

Loren Cook catalog Propeller Inline provides additional

information describing the equipment, fan performance,

available accessories and specification data.

For additional safety information, refer to AMCA publica-

tion 410-96, Safety Practices for Users and Installers of

Industrial and Commercial Fans.

All of the publications listed above can be obtained from

Loren Cook Company by phoning (417)869-6474, exten-

sion 166; by FAX at (417)832-9431; or by e-mail at

[email protected].

For information and instructions on special equipment,

contact Loren Cook Company at (417)869-6474.

Receiving and Inspection

Carefully inspect the fan and accessories for any damage

and shortage immediately upon receipt of the fan.

• Turn the propeller by hand to ensure it turns freely and

does not bind.

• Record on the Delivery Receipt any visible sign of dam-

age.

Handling

Lift tube axial fans by placing a sling around the fan hous-

ing or mounting brackets. NOTICE! Never lift by the shaft

or motor.

Rotating Parts & Electrical Shock Hazard:

Disconnect electric power before working on unit.

Follow proper lockout / tagout procedures to ensure

the unit cannot be energized while being installed or

serviced.

A disconnect switch should be placed near the fan in

order that the power can be swiftly cut off, in case of

an emergency and in order that maintenance

personnel are provided complete control of the power

source.

Grounding is required. All field-installed wiring must

be completed by qualified personnel. All field-

installed wiring must comply with National Electric

Code (NFPA 70) and all applicable local codes.

Failure to follow these instructions could result in

death or serious injury.

EDB

1 2 3 4 5 6 7 8

Sommario

Pagina 1 - Propeller Inline

Tube Axial FansINSTALLATION, OPERATION, AND MAINTENANCE MANUALStorageIf the fan is stored for any length of time prior to installation, rotate the pro

Pagina 2 - Fan Installation

2Isolator InstallationFloor Mounted FansIf the fan is being mounted to a metallic base, isolation pads should be used between the unit and its base to

Pagina 3 - Inspection

3Ceiling Mounted Unitsa. Mount the fan to its support structure.b. When all the installation supports have been removed and the fan is supported only

Pagina 4 - Wiring Diagrams

4T-1T-4Ground BL2L1Ground ALineWiring DiagramsFanMotorDamperMotor*SecondDamperMotorTransformer**Transformer**L3L2L1Wiring DiagramsWhen ground is requi

Pagina 5

5LubricantsLoren Cook Company uses petroleum lubricant in a lith-ium base conforming to NLGI grade 2 consistency. Other grades of grease should not be

Pagina 6 - Troubleshooting

6k. Install the pulley in the correct location on the shaft. Secure the bearing hold-down bolts, but do not fully tighten.l. Align the setscrews on th

Pagina 7 - ADD, EDD, and TID Parts List

71234Airflow1234Airflow1234AirflowADD, EDD, and TID Parts ListADDEDDPart No.DescriptionADD Sizes 12-24 EDD Sizes 24-48 TID Sizes 20-601 Motor (as requ

Pagina 8 - ADB, EDB, and TIB Parts List

8Corporate Offices: 2015 E. Dale Street Springfield, MO 65803 417.869.6474lorencook.comPropeller Inline IOM - Feb 2014Limited WarrantyLoren Cook Com

Commenti su questo manuale

Nessun commento

Cook Propeller Inline Manuale Utente Pagina 1

Navigare online o scaricare Manuale Utente per Cucina Cook Propeller Inline. COOK Propeller Inline User Manual Manuale Utente

Sommario

Commenti su questo manuale

Cook Propeller Inline Manuale Utente Pagina 1

Navigare online o scaricare Manuale Utente per Cucina Cook Propeller Inline. COOK Propeller Inline User Manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Cucina Cook Propeller Inline